If your hot water heater pilot light goes out every few days, it could be a sign of something more serious. Most people do not connect the hot water heater pilot light with the main gas valve. This allows for the pilot light to go out without much warning if it should. As a result, you will most likely have to call a professional to come and take a look at your pilot light. You might want to do that before you think about replacing the heater.
The reason why the pilot light often goes out is because of a leak in the gas tank. If the tank leaks, there is a good chance that the pilot light will go out as well. Some gas water heaters use float switches so that when the gas valve is closed, the light does not light. These switches are located under the dash board in the drivers side.
There are several things that can cause your hot water heater pilot light to go out. Leaks – It is common for pilot lights to go out when there are leaks in the hot water heater. If the pilot light is leaking, it could mean that there are some areas of damage to the hot water heater.
Defective pilot light – If the pilot light in your hot water heater goes out, it could mean that it has a defect or a problem with the heating element. The problem could be as simple as a low current or as complex as a burnt out heating element. It is important that you find out if the pilot light is working properly before you replace the heater. If the hot water heater pilot light is still working, it might mean that the other parts of the hot water heater are also in good working order.
Damage to the hot water heater – Hot water heaters use an evaporator to convert the water to steam and heat it. If the evaporator contacts of burnout, it can cause a fire. You should make sure that your water heater is not leaking and is not melting. This can be easily checked by looking at the gauges. A hot water heater that is leaking will have a low pressure reading, while a hot water heater that is not leaking will have a normal pressure reading.
Leakage around the hot water heater – If you find that the water pressure in your hot water heater is slowly coming down, it could be the result of a leak around the hot water heater. If the leak is near the bottom of the tank, the leak could be near the pump which raises the pressure. If you see signs of the leak around the hot water heater and you want to check it yourself, you should lift the water tank off the water heater and carefully look underneath to see if there is a hole or tear in the tank.
If you suspect that you have found a water heater pilot light gone out, you should call a licensed appliance service technician to help you. In most cases, a service technician will disconnect the water heater from the power source, and then they will replace the heating element with one that is new. They will then test the water heater to make sure that it is all working properly and that there are no other problems. It is important to know the manufacturer of the water heater to make sure that they will replace the element on their own.
Replacing the pilot light on your hot water heater is not difficult. It is however important to be careful when removing the hot water heater pilot light because you need to avoid causing damage to the hot water heater itself. It is also advisable to perform this procedure after the hot water heater has been sitting for awhile because if the pilot light goes out while the hot water heater is still on, it can cause severe damage to the heating element.