Why is getting rust off stainless steel so important? Well, a stainless steel kitchen will start to show its age in no time if it has any type of corrosion. Corrosion is not only a problem with stainless steel, it is also a problem with copper, pewter, brass and virtually every other metal you can think of. If you don’t pay attention, you may end up with an expensive repair bill.
I used to think that getting rust off stainless steel was impossible until I had a black belt in karate when I was a teenager. My instructor taught us about the concept of what you might want to do if you were getting rust off stainless steel. Basically, he explained that rust can’t truly be stopped until the metal has actually come apart. By this, he meant that you could take something as solid as this and break it apart, but it would never stop corroding or regressing unless it was all dissolved by some acidic substance.
In my case, he was correct. Corrosion cannot be stopped unless the metal is actually damaged. Once the material has come apart, the acid will eat away at whatever it touches, and then it’s just a matter of time before the item corrodes completely. This explains why you often see people trying to keep rust off of plumbing faucets or chrome knobs with acid. The acid is really good at eating away at metals until they are totally corroded. If you want to get rust off of stainless steel, the best way to go about doing it is to use something like a stainless steel acid proof saucepan.
It does take a little work, but you will need to submerge the stainless steel object under the water for about twenty minutes, or you can drain the water and allow it to sit around for a few hours. You should always use a rubber or latex glove when getting rust off stainless steel, as this will help to protect the object from getting scratched up. When the object has been submerged in the solution for about twenty minutes, remove the gloves, and wipe down the surface of the object. If there is any rust, you will see spots of red on the surface. After getting rust off of the metal, rinse it off and leave it to dry.
Another trick people like to use when getting rust off of stainless steel is to put salt onto it. The salt will dissolve the rust, because salt is an effective rust converter. You may have to buy some special salt, or make your own. Just make sure you know what type of salt you are getting. The most common type of salt used is table salt. Other salts have different properties which will work better with different types of metal.
This is a trick that will work better with some stainless steel items than others. You will need a very good razor to cut the salt off the steel, but you can use anything that will not scratch the metal. After getting rust off of the steel, you will then want to clean it, and wax it. The best way to do this is by using a good degreasing spray, and wiping it onto the surface of the object, where rust will start forming.
Once you have done these things, and you have let the stainless steel rust for about four to six hours, you can polish it. This is a much better option than using a regular coat of paint, because it does not scratch the surface, and you will still get the beautiful sheen of the stainless steel. When you are getting rust off of stainless steel, you are getting rid of one of the most durable materials in existence. If you follow these steps, and use the proper materials, you will be able to keep rusting to a minimum, and keep your equipment looking just as good as new. With just a little time and patience, you can enjoy all that stainless steel has to offer.